Sliding Door Handle: Service and Repair

REPLACEMENT

OUT SIDE HANDLE REPLACEMENT
1. Remove the following items.
A. Door trim.
B. Door trim seal.
C. Actuator.
2. Loosen the mounting bolt, then remove the outside handle bracket (A).




3. Remove the outside handle (A).




4. Installation is the reverse of removal.

NOTE:
- Make sure the door locks and opens properly.


INSIDE HANDLE REPLACEMENT
1. Disconnect the clip (A), remove the inside handle (B).




2. Installation is the reverse of removal.

NOTE:
- Make sure the door lock and open properly.