Cyclops is a one of a kind custom K40 build with many hours of planning, testing, and precision work invested. This machine has every modification and upgrade necessary to make it the highest quality unit of its type on the market! Could you buy a cheap K40 and do this yourself? Sure you could. Could you buy a 50 Watt model that is larger with many of the same features? Why, of course! What you can’t buy with those other options is the time, experience, and work that has been expended to make this unit the king of K40 laser engravers!
So you can get a laser from ebay and deal with the broken laser tube on arrival, or the failed power supply, or the bad connection in the wiring harness that takes you 2 days of research to find and correct. And don’t forget to scour the internet and look at hundreds of posts and videos on how to align the optics before finding the best and fastest way to do so.
When you purchase a Cyclops K40 from Bravo Technologies you get quality craftsmanship, meticulous attention to detail, and most importantly or knowledge and experience! Contact Us below for more information!
Cyclops is a Chinese K40 40 Watt CO2 Laser Engraver that was purchased brand new from a US based supplier. It has been professionally modified and customized with almost every available option.
This engraving machine has been completely reworked from top to bottom during the meticulous 12 hour customization process. Cyclops has been thoroughly calibrated and tested so it is ready to go!
This machine is powered by the Cohesion3D Mini Controller with a custom control panel and offers air assist, a motorized z-axis table with pin bed insert, safety interlocks to prevent the laser from firing when the panels are open.
The laser is water-cooled and features a backlit paddlewheel flow indicator and a pressure/flow sensor to prevent the laser from firing in case of a cooling system failure.
Cyclops also includes 2 stage LED illumination in the work area, a 1080 HD wide-angle camera to monitor & record your work and precision ruler guides for easy measurement and work placement.
This laser has never been used for production runs and has only been used for calibration, testing, and samples of output. The tube has never been run past 15ma and has less than 1 hour total run time.
Updated 02/07/17 – Click the item(s) for details: